Note

This procedure is typical for screw holes using screw threaded inserts.

INSPECT SCREW THREADED INSERT.

a. Visually inspect screw threaded insert (1) for burrs and broken coil. If either of these conditions are found, proceed to REMOVAL.

b. Install and tighten capscrew (2).

c. Try to move capscrew (2) from side to side.

d. If screw threaded insert moves when tightening capscrew (2) or if capscrew (2) can be moved from side to side, proceed to REMOVAL.

Was this article helpful?

0 0

Post a comment