Note

All components of damper assembly repair kit removed during disassembly should be replaced with new parts during reassembly.

1. INSTALL PLAIN ENCASED SEAL.

Apply one drop of adhesive and insert new plain encased seal (1), flat end first, into tip of damper housing assembly (2).

2. INSTALL DAMPER HOUSING PACKING.

Install new preformed packing (3) into slot inside damper housing assembly (2).

3. ASSEMBLE FLUID PRESSURE DAMPER.

a. Install damper spring valve (4), large end first, on recoil damper rod (5).

b. Install helical spring (6) on recoil damper rod (5).

c. Install damper sleeve spacer (7), small end first, on recoil damper rod (5).

d. Pull back on sleeve spacer (7) to compress helical spring (6).

1df0931

1df0931

e. Install retaining ring (8) on recoil damper rod (5). Ensure that retaining ring (8) is seated in slot.

4. ASSEMBLE RESERVOIR PISTON.

a. Using damper fluid, lubricate new preformed packing (9).

b. Install new preformed packing (9) inside bore of piston (10).

d. If retaining ring (12) was removed or a new indicator rod (11) is being installed, install new retaining ring (12) on end of indicator rod (11).

1dfD932

Was this article helpful?

0 0

Post a comment