Note

If clutch is to be disassembled, go to WP 0067 00.

REMOVAL - Continued

4. REMOVE CLUSTER GEAR ASSEMBLY.

a. Lift spur gear cluster (1) out of auto gun receiver (2) if gear has not already been removed.

b. Visually inspect needle roller bearing (3) inside auto gun receiver (2) for any breaks, cracks, or bends. Check movement of needle roller bearing for binding. If any of these conditions are found, complete steps c and d.

c. Apply penetrating oil around end of needle roller bearing (3) and wait ten minutes.

N k

©

&

O

Was this article helpful?

0 0

Post a comment