Note

Stack tight and even up spring assortment segments before the next step.

3. INSTALL SLEEVE SPACER.

Slide small end of sleeve spacer (5) over damper housing assembly (2) and inside outer spring assortment segment (4).

4. INSTALL RETAINING NUT.

Loosely install retaining nut (6) on damper housing assembly (2), assuring that safety wire holes in retaining nut (6) are facing away from sleeve spacer (5).

5. PLACE RECOIL MECHANISM IN VISE.

a. Place recoil mechanism (7) into vise with indicator rod (8) on top.

b. Before tightening the vise, ensure the vise jaws are mated with the shoulders (9) on the damper housing cap (10).

c. Tighten the vise.

Was this article helpful?

0 0

Post a comment