Do not remove lockwire from upper portion of connector (old configuration only). 2. REMOVE LOCKWIRE FROM ELECTRICAL SEAR SOLENOID CONNECTOR.
Remove lockwire from between electrical sear solenoid connector (3) and connector lock ring (4).
3. DISCONNECT ELECTRICAL SEAR SOLENOID CONNECTOR.
a. Turn connector lock ring (4) counterclockwise until free.
b. Pull electrical sear solenoid connector (3) straight out until disconnected from motor/sear plug (5).
4. REMOVE CAPSCREWS.
Remove two capscrews (6) from electrical sear solenoid (2).
Was this article helpful?