Note

Use helper to hold both pawls against spring pressure while removing spring pin. a. Tap spring pin (10) out of track (2). Discard spring pin.

b. Remove firing pin pawl (11), safety pawl (12), and pawl spring (13) from track (2).

Track Pin Removal

c. Remove headed straight pin (14) and helical spring (15) from track (2).

d. Turn track (2) so that safety handle (16) is visible.

e. Tap spring pin (17) from safety handle (16). Discard spring pin.

f. Remove safety handle (16) from track (2).

Track Pin Removal

DISASSEMBLY - Continued g. Pull detent pin (18) and spring (19) from track (2)

¡¡mi h. Turn track (2) so that clevis nut (7) is visible.

i. Pull safety actuator (20) from track (2).

If CD

'I

L

J

Uj

ipSX=

m

\1

ft

3. REMOVE CLEVIS ASSEMBLY.

a. Tap spring pin (21) out of track (2) and clevis nut (7). Discard spring pin.

c. Turn track (2) so that clevis assembly (22) is visible.

d. Place open hand under bottom opening in track (2) to catch four spring tension washers (23). Remove clevis assembly (22).

Pistol With Silencer Silhoutee

CLEANING

Was this article helpful?

0 0

Post a comment