M242 Index Drive Shaft

Lightly tap index drive assembly into position, if needed.

b. Install index drive assembly (10) on index drive shaft (12) until index drive assembly (10) is flush with index drive shaft (12).

Automatic Flusher Assembly

ASSEMBLY - Continued c. Place index drive shaft (12) in vise with vise jaw caps in place.

d. Install and torque four capscrews (13) to 80 in.-lb ± 5.0 in.-lb (9.04 N-m ± 0.57 N-m).

e. Lockwire capscrews (13) in pairs. Remove excess lockwire.

5. INSTALL INDEX DRIVE SHAFT ASSEMBLY.

a. Mate rotor stub (14) with index drive shaft (12).

b. Place gear end of index drive shaft (12) into feeder housing assembly (2).

c. Continue installation of index drive assembly (10) and rotate index drive assembly (10) slightly in both directions until it locks and falls into place.

6. INSTALL INDEX DRIVE COVER ASSEMBLY.

Align index drive cover assembly (15) with feeder housing assembly (2) and install index drive cover assembly (15) on feeder housing assembly (2).

Schematic Eibar Pistol

ASSEMBLY - Continued

+1 0

Responses

  • Virgilio
    What is the function of the index drive shaft on the m242?
    2 years ago

Post a comment