Note

Do not allow sear catch straight headless pin or sear sleeve pivot to fall out while cover assembly is being removed.

1. REMOVE COVER ASSEMBLY.

a. Position auto gun receiver (1) with cover assembly (2) on top.

b. Remove three capscrews (3).

c. Hold sear retractor assembly (4) in position. Lift cover assembly (2) from auto gun receiver (1). Release sear retractor assembly (4) slowly to relieve spring tension.

Bauer Automatic Sear Spring

2. REMOVE SEAR RETRACTOR ASSEMBLY.

a. Swing sear retractor assembly (4) away from auto gun receiver (1). Pull sear retractor assembly (4) from sear retractor pivot (5).

b. Remove sear retractor assembly (4) from auto gun receiver (1).

Bauer Automatic Auto Sear Spring

c. Remove helical spring (6) from sear retractor assembly (4).

Plane Drawing

REMOVAL - Continued

Was this article helpful?

0 0

Post a comment