M242 Upper And Lower Shouldered Shafts

All assemblies must be removed at the same time.

To facilitate removal of shouldered shafts, pull up slightly on gear clutch assembly.

a. Grasp shouldered shafts (13) and (14) and pull up and slightly to the side and remove shouldered shafts with lower and upper sliding sleeve clutches (17) and (18) and clutch yoke assembly (19).

DISASSEMBLY - Continued b. Slide lower and upper sliding sleeve clutches (17) and (18) and clutch yoke assembly (19) over the top of shouldered shafts (13) and (14).

c. Remove lower and upper sliding sleeve clutches (17) and (18) from clutch yoke assembly (19).

9. REMOVE GEAR CLUTCH ASSEMBLY.

Pull gear clutch assembly (20) out of feeder housing assembly (1).

M242 Feeder

10. POSITION FEEDER HOUSING ASSEMBLY. Place feeder housing assembly (1) on its side.

M242 Clutch

DISASSEMBLY - Continued

Was this article helpful?

0 0

Post a comment