Note

Screw, washer, and nut must be free of lubricant when applying torque.

g. Torque self-locking nut (11) to 67 in.-lb ± 8 in.-lb (7.57 N-m ± 0.90 N-m).

M242 25mm Bevfitchett

14. INSTALL LINK SHIELD (WP 0029 00).

15. INSTALL LINK BRIDGES FOR STANDARD FEEDER (WP 0027 00) OR LINK COVER ASSEMBLIES FOR ENHANCED FEEDER (WP 0028 00).

16. PERFORM AUTOMATIC GUN FEEDER MANUAL CYCLE CHECK (WP 0007 00). END OF WORK PACKAGE

DIRECT SUPPORT

M242 25-MM AUTOMATIC GUN (NSN 1005-01-086-1400) M242 25-MM ENHANCED AUTOMATIC GUN (NSN 1005-01-454-0396)

UPPER AND LOWER CLUTCH ASSEMBLIES DISASSEMBLY/ASSEMBLY DISASSEMBLY, CLEANING, INSPECTION, LUBRICATION, ASSEMBLY

INITIAL SETUP:

Tools and Special Tools

Goggles (item 19, WP 0085 00) Rubber gloves (item 18, WP 0085 00) Small arms repairman tool kit (item 43,

WP 0085 00) Small arms shop set (item 35, WP 0085 00)

Materials/Parts

Acid brush (item 4, WP 0116 00) Dry cleaning solvent (item 27, WP 0116 00) Grease (item 11, WP 0116 00) Spring pin (2) (12524618-1)

Equipment Conditions

WP 0073 00 Clutch assemblies removed

Special Environmental Conditions

Well-ventilated area required when using dry cleaning solvent.

Was this article helpful?

0 0

Post a comment