Shims may be installed under microswitches of cable assembly.
e. Remove cable assembly (4) from index drive cover (3).
a. Visually inspect index drive cover (1) for stripped threads (2), missing nutplate (3), and damaged bushings (4). If any of these conditions are found, replace entire index drive cover assembly.
b. Visually inspect cable assembly (5) for damaged connector (6) and broken or frayed cable (7). If any of these conditions are found, replace cable assembly.
c. Visually inspect switch actuator adapters (8) for cracks or damaged rollers. If either of these conditions are found, replace switch actuator adapter.
Was this article helpful?