Recoil Spring Compression Tool M242

Use helper to turn outer section of compression tool.

a. Turn the outer section (15) of recoil spring compression tool (13) clockwise until all of the outer spring assortment segments (4) are above the shoulder (18) of the damper housing assembly (2).

b. Torque retaining nut (6) to 270 in.-lb ± 30 in.-lb (30.51 N-m ± 3.39 N-m).

c. Turn the outer section (15) of recoil spring compression tool (13) counterclockwise until spring pressure is released against retaining nut (6).

10. REMOVE RECOIL SPRING COMPRESSION TOOL.

a. Remove recoil mechanism (7) from recoil spring compression tool (13).

b. Remove recoil spring compression tool (13) from vise.

25mm Model 242 Clutch Spring

Was this article helpful?

0 0

Post a comment