Gun Auto 25mm M242

NOTES:

1. Suggested Materials:

Cloth: MIL-C-20696, Type 1, Class 3, NSN 8305-00-515-4244

Drawcord: MIL-C-7515, Type 1, NSN 4020-00-113-3896

2. All dimensions are in inches.

Manufacture Instructions for Index Drive Cover Shim

Bevfitchett M242 25mm

NOTES:

1. Make from 0.020 in. shim stock, MS22499/3-005, NSN 9515-00-003-6943.

2. All dimensions are in inches.

Manufacture Instructions for Recoil Mechanism Damper Rod Tool

M242 25mm Bevfitchett

TABLE

Spiegel Swirl

Dimension "A"

Use with Recoil Housing Cap Part Number:

Use with Recoil Housing Cap with Overall Height of:

0.875 in. + 0.005 in.

12524422 Revision "B" or Lower

4.5 in. (114.30 mm)

0.685 in. + 0.005 in.

12524422 Revision "C" or Higher and 12524529 All Versions

4.3 in. (109.22 mm)

NOTES:

1. Make from aluminum or cres steel 7/8 in. (22.23 mm) round stock, suggested NSN 9530-00-184-2790.

2. Tolerances are ± 0.03 in. (0.76 mm) unless otherwise stated. END OF WORK PACKAGE

CHAPTER 6

SUPPORTING INFORMATION FOR

M242 25-MM AUTOMATIC GUN AND

M242 25-MM ENHANCED AUTOMATIC GUN

Was this article helpful?

0 0

Post a comment