Warning

Dry cleaning solvent (SD) is flammable and toxic. Use in well-ventilated area away from open flame or a smoking area. This solvent evaporates quickly and has a drying effect on the skin. It may cause cracks in the skin and, in some cases, mild irritation or inflammation. If solvent comes in contact with eyes or skin, flush with water.

CLEAN BOLT AND CARRIER ASSEMBLY PARTS.

a. Using brush and dry cleaning solvent, clean firing pin assembly (1), breech bolt (2), firing pin sleeve keeper (3), firing pin sleeve (4), cam-pin assembly (5), and carrier assembly (6).

b. Dry parts with a clean wiping rag.

Was this article helpful?

0 0

Post a comment