Warning

Wear eye protection when cutting lockwire. You can be blinded if wire hits you in the

1. INSTALL REAR TRACK.

a. Place rear track (1) in auto gun receiver (2) and align capscrew holes.

b. Install and torque two capscrews (3) to 80 in.-lb ± 5 in.-lb (9.04 N-m ± 0.57 N-m).

c. Install lockwire on two capscrews (3).

d. Using acid brush, apply a light coat of grease to rails of rear track (1).

2. INSTALL BOLT AND TRACK ASSEMBLY (WP 0053 00).

3. PERFORM AUTO GUN RECEIVER MANUAL CYCLE CHECK (WP 0008 00).

4. INSTALL AUTOMATIC GUN FEEDER (WP 0026 00). END OF WORK PACKAGE

eye.

Was this article helpful?

0 0

Post a comment