Warning

Wear eye protection when disassembling the fluid pressure damper. Fluid pressure damper is under spring tension. Use care during disassembly as parts could come loose quickly, causing possible injury to personnel.

6. DISASSEMBLE FLUID PRESSURE DAMPER.

a. Pull back on damper sleeve spacer (23) to compress helical spring (24) and gain access to retaining ring (25).

b. Remove retaining ring (25) from recoil damper rod (2).

Atk 25mm M242 Cannon
1df0923

d. Remove helical spring (24) from recoil damper rod (2).

e. Remove damper spring valve (26) from recoil damper rod (2).

Was this article helpful?

0 0

Post a comment