Warning

Dry cleaning solvent (SD) is flammable and toxic. Use in well-ventilated area away from an open flame or a smoking area. This solvent evaporates quickly and has a drying effect on the skin. It may cause cracks in the skin and, in some cases, mild irritation or inflammation. If solvent comes in contact with eyes or skin, flush with water.

CLEAN GEAR CLUTCH ASSEMBLY.

Using brush and dry cleaning solvent, clean spur gear shaft (1), helical spring (2), tubular rivets (3), flat washers (4), spur gear rollers (5), spur gear (6), and headless straight pin (7).

1df0852

INSPECTION

INSPECT GEAR CLUTCH ASSEMBLY.

Visually inspect spur gear shaft (1), helical spring (2), tubular rivets (3), flat washers (4), spur gear rollers (5), spur gear (6), and headless straight pin (7) for cracks, chips, breaks, and missing parts. If any of these conditions are found, replace defective part.

LUBRICATION

LUBRICATE GEAR CLUTCH ASSEMBLY.

Using acid brush, apply a light coat of grease to spur gear shaft (1), helical spring (2), tubular rivets (3), flat washers (4), spur gear rollers (5), spur gear (6), and headless straight pin (7).

Gear Shaft Machine Gun

ASSEMBLY

Was this article helpful?

0 0

Post a comment