Be sure headed straight pin (14) does not stick out into channels of back plate.

Install back plate latch (15) (with helical compression spring and detent plunger) into back plate (11). Align holes in back plate (11) and back plate latch (15). Install headed straight pin (14) from right to left (smooth end of pin is installed first).

M240 Check List

Install two frame handles (8) and two grips (9) securing with four screws (5), four pins (7), and four new locking pins (6).

Stake screws (5) in relief area of frame handles (8) to prevent rotation.

M240 Machine Gun

Place trigger assembly (2), helical spring (4), and arm assembly (3) in buffer housing and plug assembly (25) and secure with new spring pin (1).

M240 Check List


Was this article helpful?

0 0

Post a comment