Inspection Repair

Replace spring tension lock pin (3) if it is weak, deformed, or burred.

1BL0231

Replace retaining clips (1 and 5) if either is deformed or has lost its spring tension.

Replace cover latch (6) if cracked or burrs can not be removed.

1BL0231

1BL0234

1BL0234

Replace feed lever (4) if channel is distorted, cracked, or rippled or if pivot hole is elongated or enlarged. Remove burrs with crocus cloth (item 3, WP 0074 00), or replace if fork end (8) has burrs in the roller area.

M240/M240B/M240D/ M240E1/M240G/M240N

M240C

1BL0235

M240/M240B/M240D/ M240E1/M240G/M240N

Replace pawl retaining pin (7) if it does not hold securely.

M240C

1BL0235

M240/M240B/M240D/ M240E1/M240G/M240N

M240C

1BL0236

M240/M240B/M240D/ M240E1/M240G/M240N

M240C

1BL0236

Replace rear cartridge guide (8) and front cartridge guide (9) if they are worn, bent, broken, or have burrs or cracks.

M240/M240B/M240D/ M240E1/M240G/M240N

M240C

M240/M240B/M240D/ M240E1/M240G/M240N

M240C

Replace cover (15) if it is distorted, cracked, or if malfunction would occur if burrs were removed. Replace cover if posts (13) or pivots (16) are loose, if roller (17) binds or if malfunction would occur if burrs were removed.

M240E1/M240G/M240N

1BL0238

M240E1/M240G/M240N

1BL0238

Replace feed pawl assembly (12) if pawl has distortions, cracks, or is excessively burred or worn. Lightly lube all parts before reassembly.

M240/M240B/M240D/ M240C

M240E1/M240G/M240N

M240/M240B/M240D/ M240C

M240E1/M240G/M240N

(M240B/M240D/M240E1/M240G/M240N): Inspect accessory mounting rail (18) for nicks or burrs. If nicks or burrs prevent proper attachment of optional sighting equipment, replace cover assembly.

Was this article helpful?

0 0

Post a comment