Heat Shield Benelli

Do not remove liner from heat shield. Remove heat shield from barrel (M240B only).

HEATSHIELD

HEATSHIELD

Benelli Nova Heat Shield
1BL0050

NOTE

Clamp in gas port area (1) only.

1BL0051

UNIT MAINTENANCE OF BARREL ASSEMBLY

M240/M240C, NSN 1005-01-044-1026, PN 11825985; M240B, NSN N/A, PN 12976817; M240E1, NSN 1005-01-251-9701, PN 12597035; M240D/M240G/M240N, NSN 1005-01-408-5897, PN 12976818 (cont)_

Secure barrel assembly (2) in a vise (3) using protective jaws (4) with gas regulator (5) up. Use 23mm box and open-end combination wrench (6) to remove flash hider (7).

M249 Buttstock

Rotate collar (8) until it releases, and then pull it out.

Drive out plug (9) using a brass hammer (10). Catch plug (9) to prevent damage. Remove barrel (11) from vise.

M240b Gas Regulator

Inspect flash hider/suppressor (1), collar (2) and plug (3) for dents or burrs. Replace if damaged. If other parts of barrel assembly are damaged, notify direct support maintenance.

M240b Gas Regulator

Was this article helpful?

0 0

Post a comment