Be sure leg of sear spring (10) is in groove of sear (6) and behind riveted pin (12) as shown.

This illustration is a cutaway view of the trigger housing. Install one headless straight pin (8) in pin hole (13) in trigger housing (4) and through sear spring (10).

Holding trigger housing (4), ensure sear (6) is in raised position, insert safety (7) from left to right with the letter "S" first and facing down. Detent remains outside housing.

Rotate safety (7) a quarter turn so letters "S" and "F" face rearward.

Lower sear (6) compressing sear spring and install headless straight pin (9).


Was this article helpful?

0 0

Post a comment