Inspection and repair procedures are identical for both old and new style barrel assemblies although only the new style barrel is shown

1. Visually inspect Front Sight Base (1) in Hooded Area (2) for bends and in Dovetail Area (3) for damage. If damaged, replace Front Sight Base (1).

2. Visually inspect Key (4) for burrs. Replace if damaged or missing. Replace Key (4) if letters "B" or "C" appear on end of key.

3. Visually inspect Barrel (5) for bends, and the Dovetail Area (6) of the Gas Block (7) for damage. Replace Barrel (5) if bent or Gas Block (7) is damaged.

Gun Silencer Diagrams

NEW STYLE BARREL SHOWN

1JDU139

NEW STYLE BARREL SHOWN

1JDU139

Was this article helpful?

0 0

Post a comment