Reassembly Old And New Style Barrel Cont

4. With slot of NEW Spring Pin (8) facing rear of Front Sight Base (2), position into side cutout of Front Sight Assembly Tool (6). Hold Spring Pin (8) in position, using blade of flat tip screwdriver. By turning Screw (9), press Spring Pin (8) into Front Sight Base (2) until it stops.

5. Back out Screw (9) and remove Front Sight Assembly Tool (6).

6. Using 5/16 inch punch and alternating strikes from top to bottom, to reduce binding, drive in Spring Pin (8) until pin stops against right side of Front Sight Base (2).

Resting Shotgun Shoulder
3-11. MAINTENANCE OF BUTTSTOCK/BUFFER ASSEMBLY OR STOCK, GUN, SHOULDER: M5.

This task covers:

Disassembly/Inspection/Repair/Reassembly

INITIAL SETUP

Tools and Special Tools

References

Shop Set, Small Arms Field Maintenance

TM 9-1005-201-10

SC 4933-95-CL-A11

TM 08671A-10/1A

Tool Kit, Small Arms Repairman

USMC TAM No. E2900

Equipment Condition

Buttstock/Buffer Assembly separated

Personnel Required

and Buttplate and Shoulder Rest removed.

MOS 45B Small Arms Repairer

or

MOS 2111 Infantry Weapon Repairer

Shoulder Rest removed from Stock, Gun,

(USMC)

Shoulder: M5

Materials/Parts

Retaining Ring 12956148

Tapered Pin 9348387

Sealing Compound (item 10, app D)

DISASSEMBLY/INSPECTION/REPAIR - BUTTSTOCK/BUFFER ASSEMBLY

1. Remove Screw (1) and Backplate and Buffer Assembly (2) from Buttstock (3).

M240b Machine Buffer Assembly

2. Visually inspect Screw (1) for bends and burrs, and replace if damaged.

3. Visually inspect Pivot Tab (4) and Hole of Backplate and Buffer Assembly (2) for cracks and breaks. Replace if damaged.

4. Inspect Buffer Plunger (5) for spring tension, and oil leaks on face of Backplate and Buffer Assembly (2). If spring tension does not exist or an oil leak is detected, replace Backplate and Buffer Assembly (2).

5. Visually inspect Buttstock (3) for holes, cracks, or breaks, and replace if damaged.

Single Bullet Hole Stickers For Clothes

Was this article helpful?

0 0

Post a comment