Homemade Pistol To Carbine Conversion

Bsp Smg Homemade

Readers of 'Expedient Homemade Firearms' Volume I and II may find the following 9mm Machine Pistol design of interest. The firearm is constructed using similar materials and techniques as those illustrated in my previous books. The following construction drawings will be familiar to readers already conversant with my previous designs. The pistol uses the same design magazine shown in Volume I, though I have included the magazine base plate spring design, shown in Volume II, as a design...

Homemade 9mm Magazine

Homemade 9mm Bsp Machine Gun

See 'Volume One' for mainspring and follower construction. Upper Receiver Recess Positions. 16 W length of 40 x 40 x 2.5mm tubing The two templates are glued to a length of 1 x 1 x 12g tubing, as illustrated below. After cutting out, the receiver should look like the illustrated below. ASSEMBLING THE UPPER AND LOWER RECEIVERS Ensure top corner of magazine well protrudes 11 mm above top of receiver Ensure top corner of magazine well protrudes 11 mm above top of receiver The magazine well is held...