Guide

The measurement between washer and tip of guide rod should be 88mm.

88mm

A: 6mm Shaft Lock Collar. B: Washer.

C: Steel Ring (Tube section-8mmOD max) Solder in place. D: 6mm (or Rod.

CUT AWAY VIEW OF RECOIL SHIELD AND GUIDE ASSEMBLY

Cut away view.

Recoil Shield Bolt Hole.

The recoil shield bolt hole should be tapped to accept two 10mm diameter high tensile socket screws. The two socket screws retain the recoil shield within the upper receiver.

Was this article helpful?

0 0

Post a comment