Shell Lifter Height Adjustment

Mec Reloading Chart

It is necessary for the shell lifter to be level with the track in which the shells ride around the machine. To adjust shell lifter height 1. Make sure the reloader is at the top of its stroke. 2. Loosen the wad guide mounting screw slightly enough so you may turn it on the wad guide rod . 3. Using a 1 z inch open-end wrench, loosen the lock nut, Figure 52. 4. Put a straight edge in the track above the shell lifter, Figure 53. 5. Raise or lower the shell lifter as required by turning the wad...