Unload your rifle and remove all ammo from the area

2. Remove the Bolt. (Rifles are shipped with the bolt already removed.) Point the rifle in a safe direction. Put the safety lever in the vertical (upright) position. (If the rifle is not cocked, lift the bolt handle first, then put the safety on.) Open the bolt and pull it to the rear. It will stop against the bolt-stop.

On the left side of the rear part of the receiver is a spring loaded, hinged, release lever, which will release the bolt stop. It swings from the front, being hinged in the rear. Swing it all the way out and that will allow you to pull the bolt out of the rifle.

Was this article helpful?

0 0

Post a comment