Ctg 40mm He M383

Use only ammunition linked with M16A2 links. Use of 40 mm ammunition with either M16 or M16A1 links will cause weapon stoppages.

1. (Not for Army Use.) This category of item will no longer be procured but may be available in Navy stock and may be issued as a substitute item for the Standard A item until stock is exhausted. Ammunition containing either the M16 or M16A1 links are not to be used in the MK 19 MOD 3 as weapon stoppages will occur. The M16A2 link is the only link compatible with the weapon and can be identified by four finger-like tabs holding the rotating band.

2. The two high-explosive (HE) cartridges listed below are high explosive rounds designed to inflict personnel casualties in the target area using ground burst effects. The HE filler and body materials of these rounds differ, however, the performance characteristics are the same and neither has the armor penetrating characteristics of the Standard A M430/M430A1 high-explosive dual purpose (HEDP) round.

a. Cartridge, 40 mm, HE, M383, linked with M16A2 links (DODIC B571), is a high-explosive round designed to inflict personnel casualties in the target area using ground burst effects. This round does not have the armor penetrating characteristics of the Standard A M430/M430A1 HEDP round. The M383 HE cartridge is available in a 50 round belt packed in a wooden box (NSN 1310-00-9760907) as a 48 round belt.

M383 HE Round:

• A high explosive grenade.

• Designed to inflict casualties. Characteristics:

• Arming distance: 18-36 meters

• Wound radius: 15 meters

40 MM HE CTG M383

YELLOW "OGIVE

OLIVE DRAB WITH WHITE MARKINGS

OLIVE DRAB

b. (Not for Army Use.) Cartridge, 40 mm, HE, M384, linked with M16A2 links (DODIC B470), 50 round belt per wooden box. Limited quantities remain in Navy stock.

STANDARD B AMMUNITION - Continued

3. Cartridge, 40 mm, practice M385A1, linked with M16A1 or M16A2 links (DODIC B480), 50 round belt per wooden box, 48 round belt per M548 container, or 32 round belt per PA120 container. This round contains a projectile which has a solid aluminum body and designed only for practice or proof testing of weapons. Limited quantities remain in Navy stock.

M385A1 TP Round:

• Training practice (TP), inert rounds with a propelling charge.

Characteristics:

• Muzzle velocity: 244 mps

• Maximum range: 2,200 meters

M383 Ammunitions

BLUE OGIVE

BLUE WITH BLACK MARKINGS

AMMO LOT

BLUE OGIVE

BLUE WITH BLACK MARKINGS

AMMO LOT

OLIVE DRAB

END OF WORK PACKAGE

CHAPTER 7

SUPPORTING INFORMATION FOR

MK19 MOD 3 40 MM MACHINE GUN AND

MK19 40MM UPGUNNED WEAPONS STATION MACHINE GUN

UNIT AND DIRECT SUPPORT

MK19 MOD 3 40 MM MACHINE GUN (NSN 1010-01-126-9063) UPGUNNED WEAPONS STATION MK19 40 MM MACHINE GUN (NSN 1010-01-362-6513)

REFERENCES

SCOPE

This work package covers all forms, technical manuals and miscellaneous publications referenced in this manual.

ARMY REGULATIONS AND PAMPHLETS

AR 750-1 AR 385-40

DEPARTMENT OF THE ARMY FORMS

DA Form 285 DA Form 2028

DA Form 2028-2

DA Form 2404 DA PAM 738-750

SF 364 SF 368

FIELD MANUALS

Malfunction Involving Ammunition and Explosives Accident Reporting and Records

Accident Report

Recommended Changes to Publications and Blank Forms

Recommended Changes to Equipment Technical Manuals

Equipment Inspection and Maintenance Worksheet

The Army Maintenance Management System (TAMMS)

Report of Discrepancy (ROD) Product Quality Deficiency Report

FM 21-11

First Aid for Soldiers

AIR FORCE FORMS AND MANUALS

AFTO Form 22

MARINE CORPS FORMS AND MANUALS

TM 4700-15/1

Technical Order System Publication Improvement

Equipment Record Procedures

TABLE OF ALLOWANCES

CTA 8-100 CTA 50-970

TECHNICAL MANUALS

DOD 4160.21-M-1 TM 750-244-7

TM 9-1005-245-13&P

TM 9-1010-230-10 TM 9-1010-231-13&P

TM 10004A-10/A

OTHER

TO 11W1-10 UM-4790-5

Army Medical Department Expendable/Durable Items

Expendable Items (Except Medical, Class V, Repair Parts and Heraldic Items)

Defense Demilitarization Manual

Procedures for Destruction of Equipment in Federal Supply Classifications 1000, 1005, 1010, 1015, 1020, 1025, 1030, 1055, 1090, and 1095 to Prevent Enemy Use

Operator's, Unit and Direct Support Maintenance Manual with Repair Parts and Special Tools List (RPSTL for Machine Gun Mounts and Combinations for Tactical/Armored Vehicles and Ground Mounting)

Operator's Manual and Components for Machine Gun, 40 MM, MK 19 MOD 3

Operator's, Unit and Direct Support Maintenance Manual with Repair Parts and Special Tools List, Mount, Machine Gun, MK 64

Upgunned Weapons Station (UGWS) Assault Amphibious Vehicle, Personnel, Model 7A1, AAVP7A1

Recording of Inspection, Maintenance, and Firing Data for Ground Weapons

END OF WORK PACKAGE

UNIT AND DIRECT SUPPORT

MK19 MOD 3 40 MM MACHINE GUN (NSN 1010-01-126-9063) UPGUNNED WEAPONS STATION MK19 40 MM MACHINE GUN (NSN 1010-01-362-6513)

MAINTENANCE ALLOCATION CHART (MAC) INTRODUCTION

INTRODUCTION

The Army Maintenance System MAC

This introduction provides a general explanation of all maintenance and repair functions authorized at various maintenance levels under the standard Army Maintenance System concept.

The Maintenance Allocation Chart (immediately following the introduction) designates overall authority and responsibility for the performance of maintenance functions on the identified end item or component. The application of the maintenance functions to the end item or component will be consistent with the capacities and capabilities of the designated maintenance levels, which are shown on the MAC in column (4) as:

Unit - Includes two subcolumns, C (Operator/Crew) and O (Unit) maintenance.

Direct Support — Includes an F subcolumn.

General Support — Includes an H subcolumn.

Depot — Includes a D subcolumn.

The tools and test equipment requirements (immediately following the MAC) list the tools and test equipment (both special tools and common tool sets) required for each maintenance function as referenced from the MAC.

The remarks (immediately following the tools and test equipment requirements) contain supplemental instructions and explanatory notes for a particular maintenance function.

Maintenance Functions

Maintenance functions are limited to and defined as follows:

1. Inspect. To determine the serviceability of an item by comparing its physical, mechanical, and/or electrical characteristics with established standards through examination (e.g., by sight, sound, or feel). This includes scheduled inspection and gagings and evaluation of cannon tubes.

2. Test. To verify serviceability by measuring the mechanical, pneumatic, hydraulic, or electrical characteristics of an item and comparing those characteristics with prescribed standards on a scheduled basis, i.e., load testing of lift devices and hydrostatic testing of pressure hoses.

3. Service. Operations required periodically to keep an item in proper operating condition, e. g., to clean (includes decontaminate, when required), to preserve, to drain, to paint, or to replenish fuel, lubricants, chemical fluids, or gases. This includes scheduled exercising and purging of recoil mechanisms.

Maintenance Functions - Continued

4. Adjust. To maintain or regulate, within prescribed limits, by bringing into proper position, or by setting the operating characteristics to specified parameters.

5. Align. To adjust specified variable elements of an item to bring about optimum or desired performance.

6. Calibrate. To determine and cause corrections to be made or to be adjusted on instruments of test, measuring, and diagnostic equipment used in precision measurement. Consists of comparisons of two instruments, one of which is a certified standard of known accuracy, to detect and adjust any discrepancy in the accuracy of the instrument being compared.

7. Remove/Install. To remove and install the same item when required to perform service or other maintenance functions. Install may be the act of emplacing, seating, or fixing into position a spare, repair part, or module (component or assembly) in a manner to allow the proper functioning of an equipment or system.

8. Replace. To remove an unserviceable item and install a serviceable counterpart in its place. "Replace" is authorized by the MAC and assigned maintenance level is shown as the third position code of the Source, Maintenance and Recoverability (SMR) code.

9. Repair. The application of maintenance services, including fault location/troubleshooting, removal/installation, and disassembly/assembly procedures, and maintenance actions to identify troubles and restore serviceability to an item by correcting specific damage, fault, malfunction, or failure in a part, subassembly, module (component or assembly), end item, or system.

Was this article helpful?

0 -1

Responses

  • john york
    What gun does ein use?
    8 years ago
  • chiara
    What is dodic for 1010011269063?
    8 years ago
  • prisca
    Which HEDP ammo has an arming distance of 1836 meters?
    8 years ago
  • Fernando
    What powder in m383 40mm?
    8 years ago
  • pauli
    How to load 40mm mk19?
    7 years ago
  • fastolph
    How to demil the ctg 40mm HE?
    4 years ago
  • kyra allan
    What dodic is use for mk19?
    4 years ago
  • robel ali
    What is the dodic for the Mk19 TP round?
    4 years ago
  • florian ostermann
    Is the 40mm the same as aMK19?
    3 years ago
  • emilia
    What is the projectile weight of the M383 grenade?
    3 years ago
  • posco goold
    Is the m385a1 explosive?
    2 years ago
  • ida
    What is the dodic for MK 19 ammo?
    11 months ago

Post a comment