Unloading Mossberg 935 Magazine

Move the safety button fully rearward to the "ON" (SAFE) position and

^ keep the muzzle pointed in a safe direction at all times. At no time during unloading should you allow your fingers or any other object to touch the trigger.

1. First, remove the shells from the magazine tube. With the safety button fully rearward in the "ON" (SAFE) position, turn the shotgun so that the trigger guard is facing upward {Figure 8).

2. Depress the elevator.

3. While holding the elevator down with your thumb, press the bolt release (Figure 4). This will release one shell from the magazine tube under spring pressure.

4. Repeat this procedure until the magazine tube is empty.

5. With the magazine tube empty, pull the operating handle fully rearward. This will eject the shell in the chamber of the shotgun and lock the action in the "OPEN" position.

Visually and physically inspect the chamber, elevator, and magazine

L tube to be certain the shotgun is completely unloaded.

Hohnen Werkzeuge
Figure 8

Was this article helpful?

0 0


  • Edoardo Schiavone
    How to unload a mossberg 935?
    9 years ago

Post a comment