Info

Modified for All Steel Shot Sizes

= ACCU-MAG CHOKE TUBES =

(835 MODELS ONLY)

ACCU-MAG choke tubes are internal, flush fitting choke tubes designed for use with LEAD, STEEL shot. Each durable tube is clearly marked, as a guide, with the lead and the steel shot pattern it will produce.

To remove a choke tube from the muzzle of the barrel, loosen with the choke wrench provided, turning it counterclockwise. When choke tube is loosened, remove it completely with fingers. Put choke tube on a clean, dry surface.

To install choke tube, screw the tube clockwise into barrel by hand and then tighten the tube until snug with choke wrench. These tubes fit competely inside the barrel when properly installed. Do not use excessive force when installing. Tube tightness should be checked periodically.

Was this article helpful?

0 0

Post a comment