Sight Adjustments

BEFORE MAKING ANY SIGHT ADJUSTMENTS:

a. Move the safety button fully rearward to the "ON" (SAFE) position and keep muzzle pointed in a safe direction.

b. Open the action, visually and physically check chamber, elevator and magazine tube to be certain the firearm is unloaded.

RIFLE SIGHT ADJUSTMENTS =

IRON SIGHTS:

Elevation may be adjusted by loosening the small screw in the center of the rear sight leaf. This will allow the sight blade to be moved upward or downward as required.

Windage may be adjusted by moving the rear sight base to the left or right in the dovetail slot in the barrel. Place a wooden dowel or other object that will not damage the finish, against the side of the sight base. Tap the dowel with a hammer until the desired sight location is achieved.

Remember: Move the rear sight in the same direction you would like the shot to move. For example, if the point of impact is low and left at the point of aim, move the rear sight upward and to the right.

GHOST RING® SIGHT ADJUSTMENTS

Was this article helpful?

0 0

Post a comment