Firing Pin Block

THE FIRING PIN BLOCK LEVER IS LOCATED ON THE LEFT SIDE OF THE SLIDE JUST ABOVE THE SERRATED FINGER GRIP.

BY ROTATING THE LEVER UP (COUNTERCLOCKWISE), A RED DOT WILL BE EXPOSED INDICATING THE FIRING PIN IS NOT BLOCKED AND A PULL OF THE TRIGGER AND FORCE OF THE HAMMER STRIKING THE FIRING PIN WILL CAUSE ANY CARTRIDGE IN THE BARREL TO BE FIRED.

RED DOT

Phoenix Hp22a Magazine Operators ManualPistol Firing Pin

BY ROTATING THE FIRING PIN BLOCK LEVER DOWN (CLOCKWISE) AND COVERING THE RED DOT, THE FIRING PIN IS BLOCKED AND RESTRICTED FROM STRIKING A CARTRIDGE IN THE CHAMBER. ONLY WHILE IN THIS POSITION SHOULD ANY ATTEMPT BE MADE TO RELEASE HAMMER FROM FIRING POSITION. ALWAYS POINT PISTOL IN A SAFE DIRECTION, WITH THUMB FIRMLY ON HAMMER SPUR, PULL TRIGGER AND SLOWLY MOVE HAMMER TO ITS FORWARD POSITION. DO NOT DRY FIRE THIS PISTOL.

WARNING: IF HAMMER IS CONTINUALLY FIRED AGAINST PIN BLOCK IN THE BLOCKED POSITION, PIN BLOCK MAY BECOME DAMAGED AND NOT PREVENT CARTRIDGE IN CHAMBER FROM FIRING.

+1 -1

Responses

  • cole
    How can you dry fire the phoenix hp22?
    7 years ago
  • adiam
    What is the position of the firing pin safety lever in fire position in hp 22 phoenix?
    7 years ago
  • carambo sandheaver
    How to change firing pin safety lever on hp22 phonix arms?
    10 months ago

Post a comment