Failure to follow any of these safety rules may cause personal injury or death to the shooter or bystander and damage to property. Do not use a firearm until you fully understand and practice the Ten Commandments of Firearm Safety. If you have any questions about the safe use of a Remington firearm, write to us at Remington Arms Company, Inc., Consumer Service, P.O. Box 700, Madison, NC 27025-0700, or call us at 1-800-243-9700.

Use the Security Lock Provided with your Rifle

This rifle comes with a security lock to assist in protecting against unauthorized use. (See Picture 1). The rifle must be unloaded when the security lock is in place on the rifle. WARNING: Using the security lock cannot substitute for securing your firearm and ammunition in separate, locked locations.

Remington Spr
Picture 1

The security lock operates as follows:

1. To open the Trigger Lock put the Key into the notches of the Trigger Lock Nut and un-screw it counter-clockwise (See Pictures 2, 3). Remove the Trigger Lock Screw.

Picture 3

Picture 2

Picture 3

2. To install the Trigger Lock on a single shot rifle put the Trigger Lock over the trigger guard with the larger end of the Trigger Lock shroud pointing toward the muzzle. Then place the Trigger Lock Screw through the cross-slotted hole on the side of the Trigger Lock Shroud. (See Picture 4,).

Custom Trigger Lock For Benelli
Picture 4

Use the Security Lock Provided with your Rifle (cont'd)

3. Screw the Trigger Lock Nut on the Trigger Lock Screw (clockwise) and tighten the nut with the key.

Was this article helpful?

0 0

Post a comment