Bolt Assembly Cont

location

ítem action remarks

CAM PIN HOLE

Spray penetrant (only enough to wet the area) on the area of the component to be Inspected.

Spray developer over the penetrant and let the developer work. Cracks will be indicated by a change in color where there is a crack. If there are cracks, the component is unserviceable.

if there are no cracks, spray remover on the area, let dry, and wipe off with a wiping rag (item 15,app D). Oil the area to prevent corrosion.

Pay close attention to the area where the locking lugs meet the body.

Replace bolt assembly if defective.

NOTE

Replacement of the bolt assembly will require that the headspace be tested.

M16ai Bolt Assembly

Bolt Assembly

Bolt rings and bolt install the three bolt rings one at a time onto the bolt using care not to bend tfram. Stagger the bolt ring gaps to prevent loss of gas pressure.

Replacing Rings Bolt

NOTE: MAKE CERTAIN RING

GAPS ARE STAGGERED TO PREVENT LOSS OF GAS PRESSURE.

3-1B

TM 9-1005-249-248.P

Plyometrics Fitness Adrenaline

Plyometrics Fitness Adrenaline

It Seems Incredible That You Can Get Your Ideal Body By Jumping. This Book Is One Of The Most Valuable Resources For The Fitness Adrenaline.

Get My Free Ebook


Post a comment