Disassembling the Bolt Carrier To disassemble the bolt carrier

1 • Remove the firing pin retaining pin.

2 • Push the bolt back into the bolt carrier to the locked position.

3 • Tap the base of the bolt carrier against the palm of your hand so the firing pin will

4 drop out.

5 • Rotate the bolt cam pin 1/4 turn and lift it out.

7 • Withdraw the bolt assembly from the carrier.

8 • Press on the rear of the extractor and use the firing pin to push out the extractor

9 retaining pin. Remove the extractor and spring. The spring should be permanently

10 attached to the extractor. See figure 2-18.

Was this article helpful?

0 0

Post a comment