Note

15 The extractor assembly has a rubber insert within

16 the spring. Do not attempt to remove it.

17 If the spring comes loose, put the large end of

18 the spring in the extractor and seat it. Push in the extractor pin.

19 • Stagger the gas rings on the bolt to stop gas loss; then insert the bolt into the carrier.

20 Do not switch bolts between rifles.

21 • Hold the bolt carrier with the bolt carrier key at 12 o'clock. Insert the bolt into the

22 bolt carrier with the extractor at 12 o'clock.

23 • Rotate the bolt counterclockwise until the cam pin hole aligns to the cam pin slot in

24 the bolt carrier.

Was this article helpful?

0 0

Post a comment