Service And Parts Policy

If you have any question with regard to the performance of your rifle, please write to our Newport, N.H. Service Department, fully describing the problem.

If you should return your rifle to the factory for repair, or order parts for it, please comply with the following suggestions for prompt service:

SHIPPING FIREARMS FOR REPAIR:

Ruger M-77 rifles returned to the factory for repair should be sent to: Sturm. Ruger

& Co.. Inc.. Scrvicc Department Newport N.H. 03773. Phone: (603)863-3300.

Guns should be sent prepaid We will not accept collect shipments.

The Federal Gun Control Act, as well as the laws o! most States and localities, docs not prohibit an individual (who is not otherwise barred from purchasing or possessing a firearm) from shipping a firearm directly to the manufacturer for repair. However, before you ship your rifle to us, be certain that your State or locality does not have a law or regulation which will prohibit you from receiving the rifle from us after it has been repaired. If such receiving is prohibited, then please have a Federally Licensed firearms dealer ship the gun to us. If your rifle is sent to us by a dealer, it will be returned to him after being repaired. If a handgun (pistol or revolver) is shipped by an individual who does not hold a Federal Firearms License, it must by shipped via UPS. Persons who do not hold a Federal Firearms Liccnsc arc prohibited by Federal law from shipping a handgun by Mail. Handguns mailed in violation of the law arc impounded by the Post Office.

Please do not include rifle case, sling, telescopic sight, or custom accessories with a firearm being shipped to the factory for service. Rifles and shotguns may be shipped via Parcel Post. Always insure your shipment.

F.nclose a letter which includes your name, address, telephone number, and serial number and model of the firearm. Describe in detail the trouble you have experienced with your firearm, or the work you wish to have done. Merely stating that the firearm 'needs repair' is inadequate information.

Work performed will bear a net minimum labor charge of $10.00 plus a $5.00 shipping and handling charge. The charge for rebluing the rifle is $35.00 plus a S5.00 shipping and handling charge.

WARNING: Before shipping any firearm, be absolutely certain that it and its' magazine are unloaded. Do not ship cartridges with a firearm.

ORDERING PARTS:

All Ruger M-77 rifle parts orders should be sent to:

Sturm, Ruger &Co., Inc., Service Department, Newport, N.H. 03773.

Payment — in the form of check or money order — must accompany the parts orders. We cannont comply with open account, credit card or COD requests. Minimum parts order is $1.00. Please include $1.50 for shipping and handling.

Order parts by Part Number and Part Name and include the entire serial number of the ftrearm for which the parts are being ordered.

•Pans designated by an asterisk must be factory fitted. The price shown for these parts does not includc the minimum net labor charge of $ 10.00 plus a $5.00 shipping and handling chargc. After factory fitting of barrel and certain other components, the rifle is proof-tested with Industry Proof Loads. That procedure ensures maximum protection to the gun user. All parts in the Parts List marked with an asterisk are factory replaced on an exchange basis only. Wc will not return the replaced parts. Wc will not return modified, broken, malfunctioning or badly worn parts. See "Warning To Parts Purchasers", page 13.

Becausc it is a serial numbered component, the M-77 rifle receiver is defined as a "firearm" by Federal law and is not sold as a separate component.

Firearms users are cautioned that a gun containing modified, broken, malfunctioning, or badly worn parts, should not be fired!

Prices and Specifications si*>ject to change without notice

PARTS UST AND SUGGESTED RETAIL PRICES

Part No.

Part Nam«

Price

D-3

•Barrel (only) (spccify calibcr)

S 65.25

"•D66

Barrel Band

5.75

•••D-86B

Barrel Band Screw (not illus.)

.50

D-10

•Bolt (only)

49.25

D-35A

Safety Retainer (Complete «rial number of rifle must be specified.)

.50

D-53

Bolt Stop

5.50

D-56

Boll Stop Plunger

.50

D-57

Bolt Stop Plunger Spring

.50

D-59

Boll Stop Plunger Spring Retaining Pin

.50

D-54

Bolt Stop Screw Stud

.50

D-55

Bolt Stop Stud Bushing

.50

••D-8

Ejector

.50

D-41

Ejector Retaining Pin

.50

••D-9

Ejector Spring

.50

••D-14

Extractor

11.25

••D-15

Extractor Band

.50

D-l 1

•Firing Pin (assembly only)

23.00

**D-5

Floor Plate

6.75

D-7

Floor Plate Hinge

4.25

D-6

Floor Plate Pivot Pin

.50

••IMS

Floor Plate, STEEI. (For Long Action Only)

25.70

•••B-51

Forend Escutcheon (2 req'd) (not illus.)

(each).50

••D-27

Magarinc Box

2.50

D-l 27

Magazine Box Assy. (.220 Swift only)

3.50

•♦D-30

Magazine Follower (stainless steel)

6.50

D-31

Magazine I.atch

1.00

D-40

Magazine Latch Pin

.50

D-32

Magazine Latch Spring

.50

••D-33

Magazine Spring

1.00

C-97

Pistol Grip Cap

.75

CM 07

Pistol Grip Cap Medallion

.50

C-96

Pistol Grip Cap Screw

.50

D04600

Receiver. Mounting Screw (front)

.50

D-47

Receiver, Mounting Scrcw (center)

.50

DAS

Receiver. Mounting Screw (rear)

.50

S-63

Recoil Pad

5.00

D-84

Recoil Pad Screws (2)

(pair) .50

D-38

Safety Button

2.75

D-39

Safety Link

.75

D-58

•Safety Shaft Assembly

2.00

D-37

Safety Spring

.50

D-23

•Sear

2.00

D-42

Sear Pivot Pin

.50

D-24

Sear Spring

.50

D-71

Scopc Ring Assembly (std.) (set of two)

33.60

D-7IH

Scope Ring Assembly (high) (set of two)

33.60

D-74

Scope Ring Clamp

1.00

Part No.

Part Name

Price

D-73

Scopc Ring Nut

.75

D-76

Scopc Ring Screw

(set of 8) 1.00

D-68

Sight (front) —Plunger

.50

D-69

Sight (front) —Plunger Spring

50

••D-65

Sight Base (front)

12.25

D-70

Sight Base (front) —Set Screw

.50

D-67

Sight Blade (front)

3.00

D-77

Sight (rear) Folding, Complete

5.00

••D-60

Sight (rear) Base Only

7.75

D-ÓI

Sight Base (rear) — Center Screw

.50

D-62

Sight Base (rear) —Rear Screw

.50

D-83A

Williams Gib Lock (sight clamp rear)

.75

D-83B

Screw For Part #D-83A

.50

D-86

Sling Swivel Front Screw With Nut

1.75

OS7

Sling Swivel Rear Mounting Stud

.75

••D-4

Stock (complete with pad and checkered)

148.75

•••D-106

Stock Cross Bolt (not illus.)

2.75

♦•♦D-107

Stock Cross Bolt Nut (not illus.)

.75

♦••D-104

Stock Reinforcement Assy, (not illus.)

7.50

••♦D-75

Stock Reinforcement Scrcw (not illus.)

1.50

D-2

Trigger Guard

6.25

D-2S

Trigger Guard (STEEL) Fits all models

25.70

KD-20

•Trigger

8.00

D-20

•Trigger Adjustment Screw (engagement)

.50

D-43

Trigger Adjustment Screw (weight of pull)

.50

D-44

Trigger Adjustment Screw (over travel)

.50

D0450I

Trigger Adjustment Set Screw (over travel)

.50

D-25

•Trigger Housing

3.75

D-26

Trigger Housing Cross Pin

.50

KD-21

Trigger Pivot Pin

.50

D-49

Trigger Return Spring

.50

D-51

Trigger Return Spring Seat

.50

9Must be fitted at the factory. ••Caliber must be specified. • "Required for .458 Caliber rifles only.

ULTRA LIGHT AND INTERNATIONAL MOOEL PARTS

The following parts are for the M-77 International and Ultra light models only and are not interchangeable with corresponding parts from the basic model M-77. (The International Model is the rifle with the Mannlicber-type stock.)

Part No.

Part Na«e

Price

Part No.

Pan Name

Price

D-3M

♦Barrel

S 72.50

D-06502

Sight Base (front)

$12.25

ULTRA LIGHT

72.50

D-08001

Pistol Grip Cap

1.00

D-06702

Sight Blade (front)

3.00

D-00404

Stock

162.75

D-13I0I

Sling Swivel (front)

2.50

ULTRA LIGHT

168.50

D-01340

Stock Cap

2.75

D-13000

Sling Swivel Screw

.50

D-13200

Stock Cap Screw

.50

D-12900

Sling Swivel Escutcheon

.50

0 0

Post a comment