Warning To Parts Purchasers

It is the purchaser's responsibility to be absolutely certain that any parts ordered from the factory are correctly fitted and installed. Firearms are complicated mechanisms and IMPROPER FITTING OF PARTS MAY RESULT IN A DANGEROUS MALFUNCTION, DAMAGE TO THE FIREARM, AND INJURY TO THE SHOOTER AND OTHER PERSONS.

The purchaser and installer of parts must accept full responsibility for the correct adjustment and functioning of the pistol after such installation.

A15-T

A15-T

Pistol Parts Name

A20-1

A25-C

A25-C

A20-1

Design, specifications and prices subject to change without notice

PARTS LIST AND SUGGESTED RETAIL PRICES

Part No. Part Name Price

AMC Magazine complete $ 9.50

A29 Magazine follower (not illustrated) .75

A25B Magazine follower button (not illustrated) .50

A33 Magazine spring (not illustrated) .50

A9C Mainspring Housing Assembly complete (not illustrated) 10.75

A9 Mainspring Housing only 6.25

Al Bolt Stop Pin 2.75

A26-2 Bolt Stop Pin Pivot .50

A20-1 Mainspring .50

A25-1 Mainspring Plunger .50

A41 Detent Ball .50

A7 Housing Latch .50

A26-9 Housing Latch Pivot .50

A15 Front Sight Blade (not illustrated)(must be drilled for cross pin) .50

A26-6 Front Sight Pin .50

A20 Rear Sight for Standard Model (not illustrated) 1.25

A16 Ejector (not illustrated) .50

A25-A Ejector Rivet (not illustrated) .50

ABC Bolt Assembly Complete (not illustrated) 32.75

A21 Bolt only 27.25

A38(l-2&3) Recoil Spring Assembly 1.75

A13 Firing Pin .50

A35B Firing Pin Stop .50

A39-1 Rebound Spring .50

A39 Rebound Spring Support .50

A22 Extractor .75

A25-J Extractor Plunger .50

A25-J1 Extractor Spring .50

A100 Grip Frame, with Trigger Guard 50.50

A5 Magazine Latch 2.75

A30 Magazine Latch Spring .50

A26-1 Magazine Latch Pin .50

A26-7 Magazine Latch Stop Pin .50

A12 Trigger 2.50

A34 Trigger Pivot .50

A34-1 Trigger Pivot Lock Washer .50

A34-2 Trigger Spring .50

A25-H Trigger Spring Plunger .50

All Disconnector Complete .75

rAl8 Hammer 5.25

A26-5 Hammer Pivot .50

A26-E Hammer Bushing .50

A10 Hammer Strut .50

A26-4 Hammer Strut Pin .50

ASC Safety Complete 2.25

A19 Sear 3.50

A26-8 Sear Pivot .50

A31-A Sear Spring .50

A26-3 Sear Spring Stop Pin .50

A-108LR Grip Panels, Plastic \ 3.00

A-8 Grip Panels, Plastic I Grip panels sold in 3 00

A-108WRWL Grip Panels, Walnut \ pairs ONLY. Pairs 14.50

A-108WLTR Grip Panels, Walnut, Left with Thumbrest r i nclude medallions 18.50

A-8WRWL Grip Panels, Walnut 1 and screws. 14.50

A-8WLTR Grip Panels, Walnut, Left with Thumbrest) 18.50

A28 Medallion .50

A25-C Grip Panel Screw (Set of 4) .50

Mark I trigger pull for Standard Model (includes installation of Hammer, Sear and Trigger with backlash stop and labor). 23.00

SPECIAL COMPONENTS FOR MARK I (all other components same as Standard Model)

A20-T Adjustable rear sight, complete (will not 'work'on Standard Model) 11.00

A15T Front sight blade (T678)(must be drilled for crosspin) 1.75

BB-36 Ramp Front Sight (T512) 5.00

SXR-76 Screw for Ramp Front Sight .50

A12-T Trigger with backlash stop ' ^4.00

PARTS MUST BE INSTALLED AT FACTORY. * FOR USE ONLY WITH GRIP FRAME MARKED A-100 ON LEFT SIDE FLAT OF GRIP.

+2 -2

Responses

  • Sarama
    What diameter is the ruger mark i pistol mainspring detent ball?
    5 years ago

Post a comment