Warning to parts purchasers

ll is the pure/taker's responsibility to be absolutely certain that any parts ordered from the factory are correctly fitted and installed. Firearms are complicated mechanism^ and IMPROPER FITTING OF PARTS MAY RESULT IN A DANGEROUS MALFUNCTION. DAMAGE TO THE FIREARM. AND INJURY TO THK SHOOTER AND OTHER PERSONS. The purchaser and installer of parts must accept full responsibility for the correct adjustment and functioning of the pistol after Such installation.

PARTS LIST AND SUGGESTED RETAIL PRICES

Part No. Part Name Price

AMC Magazine complete $ 9.50

A20 Magazine follower (not illustrated) .75

A25B Magazine follower button (not illustrated) .50

A33 Magazine spring (not illustrated) .50

A9C Mainspring Housing Assembly complete (not illustrated) 10.75

A9 Mainspring Housing only 6.25

Al Bolt Stop Pin 2 75

A26-2 Bolt Stop Pin Pivot .50

A20-1 Mainspring .50

A25-1 Mainspring Plunger .50

A41 Detent Ball .50

A7 Housing Latch .50

A26-9 Housing Latch Pivot .50

A15 Front Sight Blade (not illustratedMmust be drilled for cross pin) .50

A26-6 Front Sight Pin .50

A20 Rear Sight for Standard Model (not illustrated) 1.25

A16 Ejector (not illustrated) .50

A25-A Ejector Rivet (not illustrated) .50

ABC Bolt Assembly Complete (not illustrated) 32 75

A21 Bolt only 27.25

A38(l-2&3) Recoil Spring Assembly 1.75

A13 Firing Pin .50

A35B Firing Pin Stop .50

A39-1 Rebound Spring 50

A39 Rebound Spring Support 50

A22 Extractor .75

A25-J Extractor Plunger .50

A25-U Extractor Spring .50

A100 Grip Frame, with Trigger Guard 50.50

A5 Magazine Latch 2.75

A30 Magazine Latch Spring .50

A26-1 Magazine Latch Pin .50

A26-7 Magazine Latch Stop Pin .50

A12 Trigger 2.50

A34 Trigger Pivot .50

AJ4-1 Trigger Pivot Lock Washer .50

A54-2 Trigger Spring .50

A25-H Trigger Spring Plunger .50

All Disconnector Complete .75

* A18 Hammer 5 25 A26-5 Hammer Pivot 50 A26-E Hammer Bushing .50 A10 Hammer Strut 50 A26-4 Hammer Strut Pin .50

* A5C Safety Complete 2 25

* A19 Sear 3 50 A26-8 Sear Pivot 50 A31-A Sear Spring 50 A26-3 Sear Spring Stop Pin 50

"A-108LR Grip Panels, Plastic \ 3 00

A-8 Grip Panels. Plastic I Crio Danrls «old in 3-00

** A-108WRWL Grip Panels. Walnut T pJ^NLY Pa.rs 14.50

** A-108WLTR Grip Panels. Walnut, Left with Thumbrest ( includc medallion? 18.50

A-8WRWL Grip Panels, Walnut \ and nrewv 14.50

A-8WLTR Grip Panels. Walnut. Left with Thumbrest) 18.50

A28 Medallion ' 50

A25-C Crip Panel Screw (Set of 4) 50

•Mark I trigger pull for Standard Model (includes installation of Hammer. Sear and Trigger with backlash stop and labor). 23.00

SPECIAL COMPONENTS FOR MARK 1 (all other components same as Standard Model)

A20-T Adjustable rear sight,complete!will not 'work'on Standard Model) 11.00

A15T Front sight blade (T678)(must be drilled for crosspin) 1.75

BB-36 Ramp Front Sight (T512) 5.00

SXR-76 Screw for Ramp Front Sight .50

A12-T Trigger with backlash stop 4.00

•PARTS MUST BE INSTALLED AT FACTORY.

-FOR USE ONLY WITH GRIP FRAME MARKED A-100 ON LEFT SIDE FLAT OF GRIP.

+1 0

Post a comment