The Basic Rules Of Safe Firearms Handling

Shooting Rifle With Bulged Barrel

We believe that Americans have a right to purchase and use firearms for lawful purposes. The private ownership of firearms in America is traditional, but that ownership imposes the responsibility on the gun owner to use his firearms in a way which will ensure his own safety and that of others. When firearms are used in a safe and responsible manner, they are a great source of pleasure and satisfaction, and represent a fundamental part of our personal liberty. Firearms do not cause accidents...

To Disassemble

Ruger Lever Action Rifle

With the rifle pointing in a safe direction, remove the magazine. Fully open the lever and bolt to make certain there is not a cartridge in the chamber. The rear sight leaf should be down, and the internal hammer should be cocked. Keep the lever open and the safety on. 2. Loosen the barrel band screw B-69 and remove the barrel band L06801 . 3. Loosen the take-down screw L04701 completely, but note that it will not come out of the stock. 2. Loosen the barrel band screw B-69 and remove the...

Locking Device Installation Instructions

Always keep your firearm pointed in a safe direction, including when you are installing or removing your locking device. Always verify that your firearm is completely unloaded before installing your locking device. Do not install locking devices in the trigger guard always keep your fingers and locking device outside the trigger guard during device installation and removal. Store firearms, ammunition and keys separately and securely, away from children and careless adults do not store your...

To Load And Fire With Magazine

Ruger Lever Action Rifles

Practice this important aspect of gun handling with an unloaded rifle until you can perform each of the steps described below with skill and confidence. But before you do anything with the rifle, please first read completely through this manual. 1. Keep the muzzle is pointed in a safe direction. See Rule 2, p. 39. 2. Put the safety on fully protruding from the right side of the lever housing assembly . See Figure 1, p. 9. 3. Open the lever. Check the chamber to be certain it is empty. 4. Note...

To Clear A Malfunction

Any firearm may occasionally malfunction. If it does 1. Be certain the muzzle is pointed in a safe direction and the safety is on. 2. If possible, first remove the magazine. It may be necessary to manually remove a jammed cartridge which has only partially been stripped from the magazine. If so, use extreme care. Open the bolt fully with the lever before attempting to clear the jam. Drawing the bolt fully to the rear may bring the jammed cartridge along. Keep your face away from the ejection...

Ruger Model Tm Parts List

Lever Action Shotgun Diagram

Design, prices and specifications subject to change without notice. SPECIFY MODEL AND CALIBER WHEN ORDERING See Exploded Views Pages 36, 37 amp 38 96 22 Long Rifle, 96 22 Magnum, 96 17 96 22 Long Rifle, 96 22 Magnum, 96 17 96 22 Long Rifle, 96 22 Magnum, 96 17 96 22 Long Rifle, 96 22 Magnum, 96 17 96 22 Long Rifle, 96 22 Magnum, 96 17 96 22 Long Rifle, 96 22 Magnum, 96 17 96 22 Long Rifle, 96 22 Magnum, 96 17 96 22 Long Rifle, 96 22 Magnum, 96 17 96 44 Magnum All Models 96 22 Long Rifle, 96 22...

Sturm Ruger Company Inc Southport Connecticut USA

THIS INSTRUCTION MANUAL SHOULD ALWAYS ACCOMPANY THIS FIREARM AND BE TRANSFERRED WITH IT UPON CHANGE OF OWNERSHIP, OR WHEN THE FIREARM IS LOANED OR PRESENTED TO ANOTHER PERSON. Certain states require by law that their own specified warning notices in larger-than-normal type be conspicuously included by the manufacturer, distributor, or retail dealer with firearms sold in that state. Sturm, Ruger sells its products in compliance with applicable laws and regulations. Because our products may be...

Nomenclature

Lever Action Rifle Nomenclature

In these illustrations the frequently used operating components are identified. Note that the safety is protruding fully from the right side of the trigger guard and is therefore in its on safe position. Figure 1. In these illustrations the frequently used operating components are identified. Note that the safety is protruding fully from the right side of the trigger guard and is therefore in its on safe position.