Awarningbefore shipping any

FIREARM, BE ABSOLUTELY CERTAIN THAT IT AND ITS CYLINDER ARE UNLOADED. DO NOT SHIP CARTRIDGES WITH A FIREARM.

SHIPPING FIREARMS FOR REPAIR

RUGER® SP101 revolvers returned to the factory for repair should be sent to: Sturm, Ruger & Company, Inc., Product Service Department, 411 Sunapee St., Newport, New Hampshire 03773. Telephone (603) 865-2442.

Guns should be sent prepaid. We will not accept collect shipments.

The Federal Gun Control Act, as well as the laws of most States and localities, do not prohibit an individual (who is not otherwise barred from purchasing or possessing a firearm) from shipping a firearm directly to the manufacturer for repair. However, before you ship your revolver to us, be certain that your State or locality does not have a law or regulation which will prohibit you from receiving the revolver from us after it has been repaired. If such receiving is prohibited, then please have a Federally Licensed firearms dealer ship the gun to us. If your revolver is sent to us by a dealer, it will be returned to him after being repaired. If a handgun (pistol or revolver) is shipped by an individual who does not hold a Federal Firearms License, it must be shipped via U.P.S. (Next Day Air) Persons who do not hold a Federal Firearms License are prohibited by Federal law from shipping a handgun by Mail. Handguns mailed in violation of the law are impounded by the Post Office.

DO NOT SEND GUN BOXES OR LITERATURE THAT YOU CONSIDER TO BE COLLECTOR'S ITEMS - THESE ARE INVARIABLY DAMAGED OR DESTROYED IN SHIPMENT. Please do not include holster, grip panels, or other accessories with a firearm being shipped to the factory for service. Always insure your shipment.

Enclose a letter which includes your name, address, telephone number, serial number and model of the firearm. Describe in detail the trouble you have experienced with your firearm, or the work you wish to have done. Merely stating that the firearm "needs repair" is inadequate information.

Work performed will bear a net minimum labor charge of $20.00 plus a $20.00 shipping and handling charge. The charge for metal refinishing the RUGER® SP101 revolver is $50.00 plus a $20.00 shipping and handling charge. Custom gunsmithing service or nonstandard alterations are NOT AVAILABLE from Ruger Product Service Departments.

A WARNING-PARTS PURCHASERS

It is the purchaser's responsibility to be absolutely certain that any parts ordered from the factory are correctly fitted and installed. Firearms are complicated mechanisms and IMPROPER FITTING OF PARTS MAY RESULT IN A DANGEROUS MALFUNCTION, DAMAGE TO THE FIREARM, AND SERIOUS INJURY TO THE SHOOTER AND OTHER PERSONS. The purchaser and installer of parts must accept full responsibility for the correct adjustment and functioning of the revolver after such installation.

PARTS MUST FIT CORRECTLY

ORDERING PARTS

Please contact the New Hampshire Product Service Department for parts availability and current prices. All parts orders for the RUGER® SP101 revolvers should be sent to: Sturm, Ruger & Co., Inc., Product Service Department, 411 Sunapee Street, Newport, New Hampshire 03773, 603-8652442. We cannot comply with open account or C.O.D. orders. Payment in the form of a check, money order, Visa or Mastercard must accompany your order. Credit Card orders must include the account number, expiration date and whether it is a Visa or Mastercard account. Minimum parts order is $1.00 plus $3.50 shipping and handling charge. Order parts by Part Name and Part Number and include the entire serial number of the firearm for which the parts are being ordered. There is a minimum net labor charge of $20.00 plus $20.00 shipping and handling charge if the parts are factory fitted. All factory fitted parts are fit on an exchange basis only. We will not return the replaced parts.

Barrels, cylinders, cylinder/crane assemblies and a number of other component parts must be fitted at the factory. Company policy is to proof-test and/or function fire all barrels after fitting to the frames in which they are to be used. This procedure ensures maximum protection to our customers. The special proof-test ammunition used in this testing is sold only to bonafide firearms manufacturers and is not available to gun shops, gunsmiths, or individuals.

Because the frame of the RUGER® SP101 revolver is a serial numbered component, it is defined as a "firearm" by Federal law and is not sold as a separate component.

*Parts designated by an asterisk must be factory fitted. These parts are fitted on an exchange basis only. We will not return the replaced parts. We will not return any part that is broken, malfunctioning, badly worn or has been modified. See "Warning - Parts Purchasers", p. 26.

CAUTION: A gun containing modified, broken, malfunctioning, or badly worn parts should not be fired.

Kl fiKK SPIOI® REVOLVER PARTS LIST

Design, prices and specifications subject to change without notice. SPECIFY MODEL AND CALIBER WHEN ORDERING (See Exploded View on Page 33)

Part Name

Part No.

Model

*

Barrel. 2 1/4"

KW00625

SP101

- .357 cal.

*

Barrel. 3 1/16"

KW00626

SP101

- .357 cal.

*

Barrel. 2 1/4"

KW00601

SP 101

- .38 Special

*

Barrel, 2 1/4", Extended Frame

KW00640

SP 101

- .38 Special

*

Barrel, 3 1/16"

KW00602

SP101

- .38 Special

*

Barrel, 2 1/4"

KW00617

SP101

- 9mm

*

Barrel, 3 1/16"

KW00616

SP101

- 9mm

*

Barrel, 2 1/4"

KW00607

SP101

- .22 cal.

*

Barrel, 4", Half Shroud

KW00620

SP101

- .22 cal.

*

Barrel, 4", Full Shroud

KW00606

SP101

- .22 cal.

*

Barrel, 3 1/16"

KW00612

SP101

- .32 H&R

*

Barrel. 4". Full Shroud

KW00611

SP101

- .32 H&R

Cable Lock, 10", Not Illustrated

PM120A

All SP 101 Models

Case Only, Small

RGC-S

All SP 101 Models

Center Pin Lock

KW05300

All SP 101 Models

Center Pin Rod

KW05400

SP101

- .38 Special, 9mm, .22 cal., .32 H&R

Center Pin Rod

KW05410

SP101

- .357 cal.

Center Pin Spring

KW03400

SP101

- .38 Special, 9mm, .22 cal., .32 H&R

Center Pin Spring

KW03410

SP101

- .357 cal.

Clip, Full Moon, 10 per package

VV06400-10

SP101

- 9mm

*

Crane & Crane Pivot Assembly

KW00800A

SP101

- .38 Special, 9mm, .22 cal., .32 H&R

Part Name

Part No.

Crane & Crane Pivot Assembly

KW00812A

Crane Latch

KW00900

Crane Latch Pivot

KW02700

Crane Latch Spring

KE-57

Crane Latch Spring Plunger

KH05100

Crane Pivot Lock Plunger

KH06700

Crane Pivot Lock Spring

KH07600

Cylinder

KW00100

Cylinder

KW00116

Cylinder

KW00104

Cylinder, 6-shot

KW00102

Cylinder, 6-shot

KW00103

Cylinder Latch

KW04501

Cylinder Latch Pivot

KH01400

Cylinder Latch Plunger

KE-51

Cylinder Latch Spring

KH05000

Disassembly Pin

E-63

Ejector

KW01817

Ejector

KW01800

Ejector

KW01805

Ejector

KW01802

Ejector

KW01803

Ejector Alignment Pin, (2 Req'd.)

KE-35

Ejector Retainer

KW02400

Ejector Rod

KW02300

Ejector Spring

KW02500

Ejector Spring

SPlOl - .357 cal. All SP 101 Models All SPlOl Models All SPlOl Models All SPlOl Models All SPlOl Models All SPlOl Models

SPlOl - 9mm

All SPlOl Models

All SPlOl Models

All SPlOl Models

All SPlOl Models

All SPlOl Models

SPlOl - .38 Special

SPlOl - 9mm

All SPlOl Models

All SPlOl Models

All SPlOl Models

SPlOl - .38 Special, 9mm, .22 cal., .32 H&R SPlOl - .357 cal.

Part Name

Part No.

Ferrule (Right Side), Not Illustrated

WO 1014

Ferrule (Left Side)

WO 1015

Firing Pin

KH02100

Firing Pin

KXR02100

Firing Pin Rebound Spring

KE-48

Front Latch

KW03100

Front Latch Pivot Lock

KH07500

Front Latch Pivot Lock Spring

KH07700

Front Latch Pivot Pin

KW05600

Front Latch Spring

KE-57

Front Latch Spring Plunger

KW06800

Front Sight

W03602

Front Sight

W03603

Front Sight

W03604

Front Sight Cross Pin

KW02600

Grip, 1 Piece Rubber, No Inserts

W01000

Grip with Plastic Inserts

W21000

(Disassembly Pin & Screw Included)

Grip Inserts, Black Plastic (Sold in Pairs Only)

W21018

Grip Inserts, Wood (Sold in Pairs Only)

WI

Grip Panel Locator

W03300

Grip Panel Screw

KW01300

Hammer Assembly

KW24000

Hammer Assembly, Spurless, Not Illustrated

KW24004

Hammer Dog

KW01900

Hammer Dog Pivot Pin

All SP 101 Models All SP 101 Models

All SP101 Models

All SP101 Models

All SP 101 Models

All SP 101 Models

All SP 101 Models

All SP101 Models

All SP 101 Models

All SP 101 Models

All SP 101 Models

All SP101 Models

All SP 101 Models All SP101 Models All SP 101 Models All SP 101 Models All SP 101 Models All SP101 Models All SP 101 Models All SP 101 Models

Part Name

Part No.

Hammer Dog Spring

KE-57

Hammer Dog Spring Plunger

KH05100

Hammer Pivot Assembly

KE-16

Hammer Strut

KT01500

Hammer Strut Mainspring

KW00401

Hammer Strut Mainspring Seat

KT00500

Pawl

KW00700

Pawl

KW00701

Pawl Plunger

KH05100

Pawl Plunger Spring

KH05000

Rear Sight Adjustment Screw

W05900

Rear Sight Blade

W05902

Rear Sight Spring

MR05907

Recoil Plate

KMR02000

Recoil Plate

KXR02000

Recoil Plate Cross Pin

KE-49

Recoil Plate Cross Pin

KH04900

Safety Insert

W10000

Safety Insert

W10002

Transfer Bar

KW01700

Transfer Bar

KW01701

Trigger Assembly

KW23900

Trigger Guard

KW00300

Trigger Guard Latch

KW04600

Trigger Guard Latch Pin

KE-22

Trigger Guard Latch Spring

KW03800

Trigger Link

All SP 101 Models All SP101 Models All SP101 Models All SP101 Models All SP 101 Models All SP101 Models

All SP 101 Models

All SP101 Models

SP101 - .357 cal., .38 Special, 9mm, .32 H&R SP101 - .22 cal.

SP101 - .357 cal., .38 Special. 9mm, .32 H&R SP101 - .22 cal.

All SP101 Models

All SP 101 Models

All SP101 Models

All SP101 Models

All SP101 Models

All SP 101 Models

Part Name

Trigger Link Pin Trigger Link Plunger Trigger Pivot Pin Trigger Plunger

PARTS SO MARKED MUST BE FACTORY FITTED

Part No.

KH06400 KW03700 KE02800 KH03200

Model

All SP101 Models All SP101 Models All SP101 Models All SP 101 Models u> NJ

Nomenclature Ruger Sp101
KW04600

KW04000 HAMMER

KW00900 CRANE LATCH

KW00700 PAWL

KT01500 HAMMER STRUT

Hammer And Pin Revolver Diagram

KW02300 EJECTOR ROD

KW03100 FRONT LATCH

KW05400 CENTER PIN ROD KW05300 CENTER PIN LOCK KH02100 FIRING PIN KW01700 TRANSFER

KT00500 MAINSPRING SEAT SP101

REVOLVER MECHANISM

KW04000 HAMMER

KW04501 CYLINDER LATCH KW03900 TRIGGER KW07100 TRIGGER LINK KW03700 TRIGGER LINK PLUNGER KW03800 TRIGGER GUARD LATCH SPRING KW04600 TRIGGER GUARD LATCH

KW00900 CRANE LATCH

KW00700 PAWL

KT01500 HAMMER STRUT

KW02300 EJECTOR ROD

KW03100 FRONT LATCH

KE-57 & KW06800 FRONT LATCH SPRING & PLUNGER

THE BASIC RULES OF SAFE FIREARMS HANDLING

We believe that Americans have a right to purchase and use firearms for lawful purposes. The private ownership of firearms in America is traditional, but that ownership imposes the responsibility on the gun owner to use his firearms in a way which will ensure his own safety and that of others. When firearms are used in a safe and responsible manner, they are a great source of pleasure and satisfaction, and represent a fundamental part of our personal liberty.

Firearms do not cause accidents! Firearms accidents are almost always found to have been the result of carelessness, or ignorance on the part of the shooter of the basic rules of safe gun handling.

The following rules must be observed by gun users at all times. Safe gun handling is not just desirable, it is absolutely essential to your safety, the safety of others, and the continuation of gun ownership and sport shooting as we know it today.

1. LEARN THE MECHANICAL AND HANDLING CHARACTERISTICS OF THE FIREARM YOU ARE USING.

Not all firearms are the same. The method of carrying and handling firearms varies in accordance with the mechanical provisions for avoiding accidental discharge and the various proper procedures for loading and unloading. No person should handle any firearm without first having thoroughly familiarized himself with the particular type of firearm he is using, and with safe gun handling in general.

2. ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.

Be sure of the bullet stop behind your target, even when dry-firing. Never let the muzzle of a firearm point at any part of your body or at another person. This is particularly important when loading or unloading a firearm. In the event of an accidental discharge, no injury can occur as long as the muzzle is pointing in a safe direction. A safe direction means a direction which will not permit a discharged bullet to strike a person, or to strike an object from which the bullet may ricochet.

Kepp Gun Pointed Safe Direction

A safe direction must take into account the fact that a bullet may penetrate a wall, ceiling, floor, window, etc., and strike a person or damage property. Make it a habit to know exactly where the muzzle of your gun is pointing whenever you handle it, and be sure that you are always in control of the direction in which the muzzle is pointing, even if you fall or stumble. Keep your finger off the trigger until you are ready to shoot.

3. FIREARMS SHOULD BE UNLOADED WHEN NOT IN USE.

Firearms should be loaded only when you are in the field or on the target range or shooting area, ready to shoot. Firearms and ammunition should be securely locked in safes, racks or cabinets, or by using the locking device supplied with the firearm when not in use. Ammunition should safely be stored separate from firearms. Store your firearms out of sight of visitors and children. It is the gun owner's responsibility to be certain that children and persons unfamiliar with firearms cannot gain access to firearms, ammunition, or components.

Gun Barrel Obstructions

4. BE SURE THE BARREL IS CLEAR OF OBSTRUCTIONS BEFORE SHOOTING.

Even a bit of mud, snow or excess lubricating oil or grease in the bore may cause the barrel to bulge, or even burst on firing, and can cause serious injury to the shooter and bystanders. Be sure that you are using ammunition of the proper caliber and loading for the gun you are using. If the report or recoil on firing seems weak, or doesn't seem quite right, CEASE FIRING IMMEDIATELY, unload your firearm, and check to be sure that no obstruction has become lodged in the barrel.

Rugger Bulge

5. BE SURE OF YOUR TARGET BEFORE YOU SHOOT.

Don't shoot unless you know exactly where your bullet is going to strike. Be sure of the bullet stop behind your target, even when dry-firing with an unloaded gun. If you are in the field hunting, do not fire at a movement or noise. Take the time to be absolutely certain of your target before you pull the trigger.

6. WEAR SHOOTING GLASSES AND HEARING PROTECTORS WHEN YOU SHOOT.

All shooters should wear protective shooting glasses and adequate hearing protectors when shooting. Exposure to shooting noise can damage hearing, and adequate eye protection when shooting is essential.

7. NEVER CLIMB A TREE

OR FENCE WITH A

LOADED FIREARM.

Put the firearm down carefully before climbing a fence, and unload it before climbing or descending a tree or jumping over a ditch or other obstruction. Never pull or push a loaded firearm toward yourself or another person. When in doubt, or whenever you are about to do anything awkward, unload your gun!

8. DON'T SHOOT AT A HARD SURFACE, OR AT WATER.

Bullets can glance off many surfaces like rocks or the surface of water and travel in unpredictable directions with considerable velocity.

Sp101 Hammer Dog Plunger

9. NEVER TRANSPORT A

LOADED FIREARM.

Firearms should always be unloaded before being placed in a vehicle. A suitable carrying case or scabbard should by used to carry an unloaded firearm to and from the shooting area.

10. AVOID ALCOHOLIC BEVERAGES WHEN SHOOTING.

Don't drink until the day's shooting is over. Handling firearms while under the influence of alcohol in any form, or medications that could affect your judgment or co-ordination, constitutes a criminal disregard for the safety of others.

Ruger Sp101 Exploded View

A BRIEF ACCOUNT OF AN EXTRAORDINARY

ACHIEVEMENT: RUGER FIREARMS

One of the few American firearms manufacturers whose management has remained in the same family since starting in business, Sturm, Ruger & Company, Inc., had its beginning in a small machine shop occupying a rented frame building in Southport, Connecticut. In January, 1949, with an initial investment of only $50,000 and an idea, William B. Ruger and Alexander M. Sturm started production of a .22 caliber autoloading pistol-a design which was so successful that it became the cornerstone upon which one of the most comprehensive lines of sporting firearms ever made in America was established. After Alex Sturm's death in 1951, William B. Ruger continued to direct the company alone and today, William B. Ruger, Jr. continues to provide guidance which has made this company a sound and successful enterprise.

Sturm, Ruger & Company, in this relatively short time, has established itself as a leading small arms design organization, developing a unique and broad line of fine quality sporting, military and police firearms to become one of the world's most famous producers of revolvers, pistols, rifles and shotguns. Since 1949 Ruger craftsmen have built many millions of firearms.

During its five decades of growth and progress under the leadership of William B. Ruger, the company developed a business philosophy and implemented policies which represent a constructive influence in the life of modern America. From the beginning, Sturm, Ruger & Company played a positive role in conservation efforts and has supported the interests of shooters through such groups as the National Rifle Association, National Shooting Sports Foundation, and many regional sportsmen's organizations.

The company has always endeavored to market its firearms for constructive and recreational purposes, to emphasize the traditional aspects of shooting, to render meaningful public services and to encourage shooters in constructive, responsible, and safe participation in the shooting sports. Its motto is "Arms Makers For Responsible Citizens."

Today, Sturm, Ruger & Company is particularly mindful of those elements which have contributed to the creation of its success, and extends heartfelt thanks to its many loyal employees and customers.

A current catalog of Ruger firearms is available free upon request to Sturm, Ruger & Co., Inc., Southport, CT 06890

WHY NO WARRANTY CARD HAS BEEN PACKED WITH THIS NEW RUGER FIREARM

The Magnuson-Moss Act (Public Law 93-637) does not require any seller or manufacturer of a consumer product to give a written warranty. It does provide that if a written warranty is given, it must be designated as "limited" or as "full" and sets minimum standards for a "full" warranty. Sturm, Ruger & Company, Inc. has elected not to provide any written warranty, either "limited" or "full", rather than to attempt to comply with the provisions of the Magnuson-Moss Act and the regulations issued thereunder. There are certain implied warranties under state law with respect to sales of consumer goods. As the extent and interpretation of these implied warranties varies from state to state, you should refer to your state statutes. Sturm, Ruger & Company wishes to assure its customers of its continued interest in providing service to owners of Ruger firearms.

Cal Revolvers Nomenclature
0 0

Responses

  • Amaranth
    Where return ruger revolver for repair?
    6 years ago
  • olavi pihlava
    When did ruger stop production on there sp101 in .38 cal?
    6 years ago
  • mildred reed
    Why no hipgrip for the sp101?
    6 years ago
  • terhi
    How to hold a gun diagram?
    6 years ago
  • cruz
    How to install front latch pivot lock spring ruger gp100?
    9 months ago

Post a comment