After shooting

- Dry the moist gun and oil it.

- Clean the barrel as follows:

- Remove copper jacket foulings.

- Store in a horizontal position.

ANNUAL MAINTENANCE OF THE SAKO TRG

- Clean the barrel carefully.

- Remove the metal parts from the stock.

- Clean the inside of the metal parts and the stock.

- Clean the screws and pins.

- Oil the metal parts.

- Oil the swivels and check the attachment.

- Deal with the bolt as follows:

- Remove the firing pin.

- Remove old oil from the bolt and the firing pin.

- Clean the bolt face and locking lugs.

- Clean and check the extractor and the ejector.

- Check the firing pin point and the attachment of the bolt sleeve.

- Lubricate the firing pin and inside of the bolt lightly with cold resistant oil.

- Lubricate the locking lugs, cocking slope, bolt sleeve locking cams and cocking piece with viscous and durable oil.

- Assemble the firing pin and check protrusion (1.65 mm) of the firing pin point.

- Check the attachment of the sights and scope.

- Assemble the gun, test the function and perform a trial shooting.

PFLEGE- UND WARTUNGSANWEISUNGEN FÜR DAS SAKO TRG

- Lesen Sie die Gebrauchsanweisung durch

- Entfernen Sie Ölfilm und Fettrückstände

- Überprüfen Sie alle Schrauben an der Waffe auf festen Sitz

Was this article helpful?

+1 0

Responses

  • RALPH
    Is it bad to not clean a sako TRG barrel?
    9 years ago

Post a comment