Removingattaching the ejector

- Remove the ejector by drifting the 2.5 mm pin out (Fig. 4) after which the ejector is allowed to come out when a drift punch is taken out of the pin hole (Fig. 5); be careful not to let the ejector and spring drop freely out and get lost.

- On attachment guide the ejector with the drift punch through the pin hole into a right position and after that drive the pin from the opposite side into its place (Fig. 6).

Fix Ejector Bolt Action

Was this article helpful?

0 -1


  • Columbus
    How to change the ejecter on a sako trg?
    3 years ago

Post a comment