Turning Os The Unit

a. Turn en the radio set by turning the volume control knob clockwise.

b- Set the vol u ebb control far the desired volume ( the SQ control must be in the jcaximim counter clockwise postion) >

c. Adjusx the SQ control for the threshold by advancing clockwise slowly, just until 1 the noise stops and the green WRM light goes out. Advancing the control further will reduce the sensitivity of squelch break.

1, All preset data is stored in an internal, nan-volatile memerory. T he power battery can be changed without disturbing the preset data, when the radio set is turn on the display shows the last display in use when the radio set was turned off, excepi the ECU and modem will always be turned off at turn on.

NOTE: AFTER ALL PRESETS AND OPERATING MODES HAVE BEEN SELECTED, THE CURSOR SHOULD BE SET OFF THE SCREEN TO PREVENT UNWANTED CHANGES IF THE SET KEY IS INADVERTENTLY PUSHED.

UOTE: THE UNDERSIDE OF THE COVES CARRIES A LAELE INDICATING THE DATE THE MEMORY BATTERY VAS INSTALLED. THE BATTERY SHOULD EE REPLACED EVERY 2 YEARS.

Was this article helpful?

0 0

Post a comment