Bayonet Ms Assembly fig

a« Insert scabbard catch spring in well in blade handle just to rear of guard.

b» Insert small end of scabbard catch into well to bear on spring, with hook of catch projecting forward through slot in guard.

e. Press scabbard catch against spring and insert small end of bayonet catch, from left, through hole in scabbard catch. Push bayo-

Remove Bolt Springfield 1903

\ ESCUTCHEON i A15264-1

ORDNANCE MAINTENANCE - U.S. RIFLES, CAL. .30, Ml903, M1903A1, Ml903A3 AND M1903A4

SCREW - A1527 31 " CRIP - C64037

CATCH - B147059 \

• ESCUTCHEON - A152645 SPRING - B147063'

BLADE ASSEMBLY

D35351

CATCH - B147058

CRIP C64036

RA PD 84294

Figure 59 — Bayonet M1905 — Exploded View of Handle net catch forward and in toward blade handle so that hook projects into bayonet stud slot in rear end of blade handle, and body of catch seats in cut in bridge of blade handle.

d. Reposition escutcheons in grips, if removed, and seat right grip on blade handle and insert grip screw through grip, blade handle, and bayonet catch. Then seat left grip, thread screw into it, and draw down tight c. Test both catches by pressing in scabbard catch and releasing. It should return by spring pressure and both catches should then be in locked position.

21. BAYONET Ml, DISASSEMBLY (fig. 60).

a. This bayonet is basically identical with the Bayonet M1905 except for length of blade and minor points in design. The grips are of composition instead of wood. The escutcheons are sealed in at manufacture and should not be removed. Disassemble as prescribed for the Bayonet M1905 in paragraph 19.

(CUARD>

SCREW - A152131 CRIP-Cl 13681

CATCH - B147059

SPRING - BI47C63

CATCH - B14705S

CRIP - CM3680

Bayonet Disassembly

RA PO 79914

Figure 60 — Bayonet Ml — Exploded View of Handle

(CUARD>

CATCH - B14705S

CRIP - CM3680

SCREW - A152131 CRIP-Cl 13681

CATCH - B147059

SPRING - BI47C63

RA PO 79914

Figure 60 — Bayonet Ml — Exploded View of Handle

a. This bayonet is basically identical with the Bayonet M1905 as stated in paragraph 21. Assemble as prescribed for the Bayonet M1905 in paragraph 20.

23. TELESCOPIC SIGHT (RIFLE M1903A4), DISASSEMBLY

a. The telescopic sight used with the Rifle M1903A4 should not be disassembled. Removal of the mount rings is explained in paragraph 58. Damaged sights should be sent to a base shop (or the factory) for repair or disposal.

24. TELESCOPIC SIGHT (RIFLE M1903A4), ASSEMBLY (figs. 8 and 58).

a. There being no disassembly permitted of the telescopic sight used with the Rifle M1903A4 with the exception of the removal of the mount rings, no assembly is required except the replacement and adjustment of the mount rings when necessary. This procedure is explained in paragraph 58.

Section 111

0 0

Responses

  • carl
    How to remove a springfield 1903 bayonet?
    8 years ago
  • natalie
    How to disassemble the M1903 bayonet?
    8 years ago
  • prisca
    How to remove bayonet from 1903 springfield rifle?
    8 years ago
  • novella
    How to dismantle 1903 sprinfield?
    8 years ago
  • BANAZIR
    Where can I get a m1905 bayonet catch?
    7 years ago
  • juliane thalberg
    How to disassemble 1903 bayonet?
    7 years ago
  • Omar
    How to repair a M1905 bayonet catch?
    5 years ago
  • elisa
    How to rebuild a m1905 bayonet?
    3 years ago
  • MARKO
    How to fix bayonet catch assembly p1907?
    2 years ago

Post a comment