Standard Trigger Mechanism

- The trigger has no first pull and the trigger pressure is set at the factory to approx. 1.5 kg.

- Both the sear engagement and safety are set at the factory and need no adjustment of any kind.

- Should you wish to alter the trigger pressure, the stock must first be detached.

To do this, remove the trigger guard fastening screws.

TRIGGER ADJUSTMENT (Fig. 8)

- The trigger pull is adjustable from 1 kg to 2 kg (2 to 4 lbs) by means of the screw 1.

- Turning the screw clockwise will increase the pressure. Turning the screw counterclockwise will reduce the pressure.

NOTE! FOR SAFETY REASONS DO NOT ATTEMPT TO REDUCE TRIGGER PRESSURE BELOW 1 KG (2 LBS).

- When assembling the firearm always remember to put the aluminium recoil block into place in the stock.

Tikka M558 Trigger

ASEEN HUOLTO KAYTÓN JALKEEN

Varmistaudu, ettá patruunat on poistettu seká lippaasta ettá patruunapesástá. Irroita lukko ja tyonná oljytty puhdistustuppo pii-pun lápi. Asetta voidaan sáilyttáá tállaise-na jonkin aikaa. Perusteellisen puhdistuksen jálkeen piippu oljytáán ohuesti. Lukko sa-moin kuin kaikki muutkin ulkopuoliset terás-osat puhdistetaan kevyesti oljyisellá tu-polla.

Was this article helpful?

0 -1

Post a comment