Up or down elevation adjustments

Adjusting elevation on your Model 63 requires you to lift up the rear notch blade holder on your rifle's FIGURE 18

Adjusting elevation on your Model 63 requires you to lift up the rear notch blade holder on your rifle's FIGURE 18

•WINCHESTER.

FIGURE 19

FIGURE 19

rear sight with your fingers and move the notched elevator either forward or backward (see Figure 18). To raise point of impact, use your fingers to lift up on the blade and slide the elevator rearward. Adjusting the sight to make your gun shoot lower is just the opposite — move the elevator forward. Remember:

• Move the blade and holder ug to shoot higher.

• Move the blade and holder down to shoot lower.

RlQHT OR LEFT WINDAQE ADJUSTMENTS —

On Model 63 sights, the entire rear sight blade holder is dove-tailed in the rear sight base. To adjust for windage, gently move the rear sight blade to the right or left by tapping at the dove-tail using a wood or fiber dowel or hammer that will not mar the sight (see Figure 19). If you tap to the right your gun will

Was this article helpful?

0 0

Post a comment