Never Attempt To Take Your Rifle Apart Further

THAN EXPLAINED IN THIS OWNER'S MANUAL. Your rifle is a specialized, finely-fitted mechanism. You may permanently mar it by attempting to disassemble the inner mechanism assemblies. If further disassembly for service or cleaning is required, take your gun to a Winchester Rifles and Shotguns Authorized Repair Center or a qualified gunsmith as explained under Parts, Service, Repair and Questions on page 23.

Winchester Autoloading Super X Rifle

Name All Parts The Rifle

Customer Service Department United States BACO, Inc. 275 Winchester Avenue Morgan, Utah 84050-9333 Phone 800 945-5237 If you have any questions or comments regarding your new firearm, please feel free to write or call us. Use the space below to record information about your new firearm. Winchester and associated trademarks are registered trademarks of Olin Corporation. Dura-Touch is a registered trademark of Browning. NEU06101.5 06014 Gun Safety Warnings 1 General Description 2 General...

Rifle Features

A comfortable recoil pad takes the sting out of magnum cartridges. The one-piece, aircraft-grade alloy receiver is lightweight, yet incredibly strong. Multiple lug bolt lock-up gives this rifle the ability to fire both standard and magnum cartridges accurately. A comfortable recoil pad takes the sting out of magnum cartridges. Multiple lug bolt lock-up gives this rifle the ability to fire both standard and magnum cartridges accurately. The crossbolt safety is easy to locate and operate, even...

Do Not Disassemble The Trigger Group Beyond This Point

Winchester Autoloader

Before reinstalling the trigger group, make sure that the bolt is fully forward and engaged in the locked position. 2. Visually check the safety on the trigger guard to make certain it is still in the on safe position. 3. Insert the trigger group back into the receiver, lining up the holes in the trigger group with the holes on each side of the receiver. 4. Insert the trigger group pins from either side of the receiver and gently tap them into place using care not to scratch the receiver....