The Supreme is an over and under shotgun design made to fire two successive shots by pulling the trigger twice — once for each shot. Each time the action is broken open the hammers are cocked automatically. Each time the action is opened empty shells (one or two) are ejected clear of the chamber(s) automatically. Unfired shells are elevated in the chamber. They can be left in place or removed with your fingers. The action is broken open with a lever mounted on the top of the receiver just forward of the safety switch. The Supreme breaks down into three pieces in just seconds for cleaning or storage.
Prior to using live ammunition, familiarize yourself thoroughly with all the operating instructions in this manual. Get accustomed to the feel of your new gun. Know the forces required to operate the action. Understand how to select the firing order of the barrels. Learn how to pull the trigger correctly, and above all, know the location and operation of the safety. Procedures for disassembly and operation of various components are outlined in the sections below. Please read and study them thoroughly.
Safety/Barrel Selector
Top Lever
Receiver
Buttstock
Top Lever
Vent Rib
FIGURE 1-A
Front Sight Bead
Trigger
Trigger Guard
Muzzle
Forearm
Recoil Pad
FIGURE 1-B
Fully Disassembled
Chambers Forearm Release Latch Lug Side ribs
Invector Plus Choke System®
FIGURE 1-B
Chambers Forearm Release Latch Lug Side ribs
Invector Plus Choke System®
Forearm Release Latch
Forearm Extension
Forearm Release Latch
Forearm Extension
In addition, always remember:
IMPORTANT: ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.
USE THE CORRECT AMMUNITION /IS REFERENCED BY THE INSCRIPTION ON THE BARREL.
BEFORE LOADING YOUR GUN BE SURE ALL GREASE AND OIL HAVE BEEN REMOVED FROM THE BARREL AND CHAMBERS, AND THERE ARE NO OBSTRUCTIONS.
Was this article helpful?
Post a comment